Hi,
I have a brand new Dell C1760nw printer. I am trying to print using my macbook. It shows up in my printers and will briefly register a print job. However, the printer immediately says "cancelling job" and nothing prints. I've tried downloading the drivers but nothing seems to be working. It will print test pages in both black and white and in color. Any ideas for what I can try to fix it?
Thanks.
Hello
Is the DELL 1320C printer compatible with OS 10.11 (Capitan)? The last driver update was in 2012.
I downloaded the printer driver and install it but the printer did not appear under the printers section in system preferences then tried to re-install it using its IP and it got installed but when I send a job to it, I can the error: Printer is not responding.
Any suggestions please?
Many thanks
Since I cannot easily replace the ESS board in my currently malfunctioning 3765DNF, is there any way to get my hands on a good EPROM? I noticed after pulling the chip that the printer no longer can write data, and just gets stuck on "Please Wait".
I figure if I could get a good chip with the proper Dell printer programming, my printer would be back online, as the chip is easily accessible.
If I have this backwards, and the data is being written to the EPROM from another memory source, please let me know.
Why isn't there a way to interrupt the firmware update, once sent to the printer? I located the battery on the ESS board, but unfortunately it's spot welded to the contacts (not soldered.) So it's a no go on removing the battery in hopes to hard-reset the printer.
Thanks!
On the above printer we have it set to print 2 up and duplex, an issue has become apparent when we try and print multiple copies of a 5 page doc for instance, the second copy will start printing on the back on page 5 of the first copy, any way to set it start printing copy 2 on a fresh sheet?
I have 3 B1265 network laser printers. They all have the same problem.
Many times they will not wake up when a job is sent to print.
Sometimes the fix is just pressing the power button but most of the time it requires pulling the power plug out and replugging it.
Please help!
I wanted to print round labels that come on 4x6 sheets, but the printer insists they're envelopes. I can change the settings to letter paper and custom size to 4x6 but the output is still totally offset. If I print on a sheet of letter size paper, it prints the label sheet at the far left, about 3 inches down the page.
Please help with a solution to using my 3010cn printer with W10. Thanks
Hello!
I believe I am about 7 years late to the party, but I had this printer for a while, new in box due to moving several times. Now that I am settled, I tried installing it wirelessly or USB and it is driving me crazy.
I have to keep deleting it and re-installing its drivers, and even then I can only print one page at a time before it decides it needs a break. So my 3rd page (of a word document - 19 mb) is in queue forever (13 minutes now).
Please help.
My 922 printer has a broken color receptacle lid.
Is there any way to repair it?
If not, what is the best way to remedy this? Is it possible to replace it with a reconditioned one, or maybe upgrade to a similar printer that uses the same cartridge?
I have back-up cartridges for this printer, and I would not like to waste them.
Thanks.---Lew
I have connected a newly-acquired B1163w multifunction printer to my MacBook, after downloading the swr and Mac driver from the Dell site. The B1163w successfully scans from the glass but I cannot get it to recognize the document feeder as an alternative source, even tho' this is described on the "Basic Scanning" page of the documentation.
What is needed to get the document feeder to be recognized and used to feed a multipage document I wish to scan?
I have been having ink problems with my printer recently where it does not print yellow (despite printing the other two colours in the cartridge fine) and black.
I have replaced the black ink and it seemed to fixed the problem until yesterday when I went to print a powerpoint document and it printed one page and would not print anymore. The only page that came out was covered in black squares randomly (about 1cm x 1cm) that appear to be ink marks.
This is now happening on any document i print even the test pages
Please can you suggest what may be causing this/how i can fix it. Thank-you.
Windows 10, Dell Inspiron - been working fine for years - 2 printers 1 is usb, the other wireless. Solution to problem is to turn off Windows Defender before printing. Reloading printer software did not solve problem. Any one know of a permanent fix ?
Hello!
Yesterday I wanted to print and scan some documents and after turning my printer, E525W, on it showed me the error code 2060000.
Can I do something to fix this error?
kindregards
Markus
I have two 1320c printers which have provided sterling service over many years. Somehow I have managed to get a toner cartridge jammed in one of them. The door will not swing out and I think it is because something broke on the catridge iteslf and is now stopping the cartridge from being removed. I think I will be able to remove it if I can strip down the printer. To this end I have repeatedly asked Dell to let have a pdf of the service manual but they seem unable to grasp what is required. I cannot believe that only the user manual is available but this what they have told me ! Does anyone know where I can get a copy of the 1320c service manual ? I have spent hours looking on the web without success and am thinking that the printer will need to be scrapped.
Thanks in advance,
yamyam49
Never in my life have I used a printer that has so many connection issues. This 525 WILL NOT WAKE UP TO PRINT no matter what I do! I've tried everything. Updated the firmware, restored the printer to default. Erased the NVM, Tried 3 different laptops, 2 running windows 10, the third running Windows 7. I've switched out my router, set static DHCP, used the Dell software install application, tried using Windows install via TCP/IP settings instead of the software. It does not work no matter what I do!
I finally gave up on the wireless aspect and ran an ethernet cable through the wall to hardwire the connection. It STILL WON'T WAKE UP!!!!
I've wasted 1+ day trying to get something as simple as a printer to turn on and print without having to turn it off and on first!
Is it really THAT DIFFICULT to have the option in the printer settings to disable deep sleep mode???
I probably will bring it outside and smash it to pieces with my sledge hammer. Stay tuned for the Youtube video.
I will never again purchase a product with the Dell nameplate as long as I live.
Hi.
We have a Dell 3115cn printer in our workshop, which belongs to a school, for repair, which displays error 093-971 relating to Magenta Toner. The toner is a compatible type.
Sensors and contacts have already been cleaned, but error still persists. Any advice?
Good Afternoon,
We have a unique display issue with one of our BN2375 printers. The main screen has lost all the button controls and we cannot log into the panel. Nothing is functional on the main screen but the printer will still print.
Is there a internal factory rest button near the control panel or any piece of circuitry that could be removed to flash the control card? (Or something along lines like this) does anyone know? I cannot get into the service menu with the "Home" "Job status" and "Information" hold either.
Thank you,
Neil
I have a C2665dnf printer. When I print a group of payable checks, it does not finish the last check and stub then the printer keeps printing blank pages except for one or two lines of random charaters.
I was hoping someone could point me in the right direction of a printer issue or the software (SAGE) that I am using to print the checks.
please Help
john
Recently, I've been having problems scanning documents through my Dell E525W. I get an SMB error 031-556 Scan Write Error. Does anyone know what this means or how to fix it? Thanks in advance.
I have a 3130cn that is giving me a paper jam error code 077900, but there is no paper jam. Is there any way to clear the message, or is there anything other than a paper jam that could be giving me this false message?