I have done all the suggested fixes for this error code but still repeating itself. the error code says reseat magenta drum and toner , I have done it numerous times.
I have a DELL C3765dnf printer. I need it working for work.
Any help would be grateful.
It was working fine, did sort of smoke a little when printing a lot of documents but seemed fine now no power and though I changed the fuse no good! I have ordered a ne power lead but just wondered if anyone else is aware of problems with these has not been used for more 3 months in the whole time we have had it. Thanks in advance
We've got a Dell 2825 CDN with an additional tray - we cant print to the tray it doesn't show in print options how do we make this possible..
Can't get E525w to scan to desktop (iMac). Read through user manual, read other online posts, can't figure out what problem is.
--Bought new E525w a few months ago for home use. Have been printing with it, no problems, using iMac desktop with USB connection, and a MacBook Pro wirelessly.
--Recently tried scanning function. No joy. Put document on platen, hit "Scan", then "Scan to Computer (USB)", then "Start", display reads "Computer (USB) [Waiting]", and after a minute or so, times out with a "Job Failure".
--Downloaded user manual and read through Scanning section. Ensured that Function Enabled does not require password to scan (or do anything else).
--Checked Applications on desktop (maybe a driver issue?), and in Dell folder is Address Book Editor and ScanButton Manager. Do not know what to do with ScanButton Manager. Searched User Guide for "scanbutton", no joy. Tried "scan button", and just got a lot of "scan (button)", which didn't help. Opening it shows a destination path (appears to be Desktop) that I'm fine with for right now, just to get it to work.
--Checked Printers and Scanners on desktop, and Dell shows up under Printers, and under Faxes (have not tried that, do not have a landline), and under Scanners (two icons: Dell E525w Scanner, and Dell E525w Scanner 2; do not know why there are two icons). When click either icon, get a Scanner window intended, presumably, to display an image of what is to be scanned, and a button on lower left that reads "Scan". No image using either icon, even though there is a document on the printer platen.
--Have read a couple other E525w posts on this forum, but they don't address my specific issue.
Mystified. Don't understand why this should be hard to do, although I'm learning that the multiple functions of this printer appear to make it more complex in terms of setup.
Any help or ideas greatly appreciated. Won't be surprised if it's something simple that I just missed.
I just bought a brand new MacBook Pro (my first Mac) and am trying to connect it to the Dell C1766NFW. I can't seem to find a driver that is compatible with macOS Sierra. It is Version 10.12.3. I realize I can print through a USB cord but want to print wirelessly like I can with my Windows laptop. Is this possible? Any help that you all can provide would certainly be appreciated. Thank you for your time in advance.
Hello,
I have a Dell all in one inkjet printer (A920) and recently was blessed to be given a Dell Laptop (Latitude; E6400), that has the OS Windows 7. I am asking if my printer would be compatible with this laptop? I lost the cd driver to install the printer on the laptop, so would it be possible to find a way to download the software? Please help.
In May 2012 I bought a Dell V725w. I’m getting a “Printhead Not Supported” message whenever I turn it on. Fresh cartridges, cleaning the printhead, etc. used to bring the printer back to normal, but no more.
My questions:
1. Do printheads always wear out in less than five years?
2. Could the error message be caused by some problem other than the printhead? I bought the printer to print materials in black, thinking the colored cartridges wouldn’t be a problem because I’d never use them. I didn’t learn until later that the printer will not print without the colored cartridges (this was not mentioned in any of the marketing materials, and only obliquely in the manual). I’m wondering if printing only in black (except for the printhead alignment required every time I use the printer) has caused the problem, and if there’s some remedy other than buying a replacement printhead?
3. The price for a new printhead for Dell’s V715w printer is $149 from a vendor on Amazon https://www.amazon.com/gp/offer-listing/B0055TL2EO/ref=dp_olp_new_mbc?ie=UTF8&condition=new , but they say they can’t be sure it’s compatible with the V725w. So far I haven’t found a vendor with a printhead compatible with the V725w—any suggestions?
4. Rick mentioned the Lexmark 100 (part# 14N1339) several times as a replacement printhead. His guidance is always excellent and a printhead seems pretty basic, but I’m wondering about the difference in price. Can the $31.50 Lexmark printhead perform as well as the $149 Dell printhead, or is there some fundamental difference I don’t understand?
Thanks for your thoughts and ideas,
anima_in_LA
I followed the instructions to install the drivers for windows 8. "Communication Not Available" keeps poping up, and I have tried everything listed there. I know virtually nothing about drivers and such, so please explain what I need to show or do to fix this issue. And no, there are no other options for a printer.
How would I get out a piece of label that is stuck so when I print it has a impression of the label on the papers that print?
I just installed the printer onto my old desktop. its running on XP Professional (old i know, but its what i got) and when trying to print it just spits out blank paper. I just put brand new ink cartridges in it. When i try to print or make a copy it goes through the motions but ink never makes it to paper.
It does scan fine though.
How do you "center" the print head to enable removing and cleaning?
Where are the SMTP settings to set up scan to email on this printer? If I log in via browser, the only stuff I can find is under "email alerts" but it doesn't allow me to enter settings without an smtp username and password. All my other scanners just need our smtp server address and port number but this printer doesn't seem to allow user/pass to be blank. Any ideas?
I have a 64-bit Windows 8.1 (I know, I hate it, but it's the companies computer). After many years, my Lexmark died; I had a spare Dell AIO 926. After hours searching forums telling me I can't use it, I finally found instructions to allow me to install and us it (basically, download the Vista 64-bit Install, run in Vista compatibility mode as administrator, and repeat to run the Setup program).
Printer works; prints, scans, everything. I just get an annoying popup following every print or scan, saying "Job Status Window Interface has stopped working". I hit stop program; it comes up one more time, then that's it.
Not the end of the world; printer works, and it is just an annoyance. But if anyone knows how to get rid of this message, I'd really appreciate it. Thanks.
Hi, how do I scan to PDF from my Windows computer? Dell B3465DN
Thank you!
I have a Dell V720 printer which I use on a wireless network. I bought a new computer with Windows 10 and unfortunately I can neither print nor scan. I get a "computer connection error" 9the name of my nez computer is different of the old one0. Can someone explain me how to change the computer's name in the printer in order to reflect the nez one correctly. Many thanks in advance
I've had a Dell H625CDW for a little over a year now. It's been problematic to say the least. I noticed there was a new firmware release, so in hopes that it might solve the strange problems I've had with this printer, I decided to update the firmware.
The firmware update appears to have completed just fine. The printer works as expected for printing. However, I cannot make any changes to the settings of the printer now. Any time I try to "save" printer setting change via the webpage, I get a "unauthorized access" message on a white page.
How can I fix this?
I just purchased a Dell C1760nw printer for my personal home use. I was really excited and couldn't wait to set it up and use it. I installed and set up the wi-fi printing from my MacBook Air. Well when i finally went to print something it would pull up and go through all the typical printing stuff and then when it connected to actually print the document the tiny screen on the window said "cancelling job". It has done that with everything i have tried to print tonight. I have restarted my MacBook, the printer and my router and even hard wired it directly to my MacBook and still nothing. I really need some help as to why it keeps doing this. I spent more than i should have on this printer for it not to be working correctly. I'm getting really disappointed and discouraged.
Hello,
I have a Canon Pixma MX925 wifi printer connected to my network. All other units and computers on the network are able to locate the printer and connect to it just fine, except for my laptop which is a Dell Latitude E6420.
When I connect the printer directly to the router by a LAN cable, my laptop is able to locate the printer, but that won't be a workable solution, so I need to figure out how I make my laptop locate the printer on the wireless network without the need of a LAN cable between my router and my printer.
I have already tried resetting everything and re-installing drivers on both my laptop and my printer, but nothing seems to work. Since all other units connects to printer without problems, I suspect the problem to be related to the network adaptor in laptop, but I don't know what else to do, than to update the driver, which I already did.
Any suggestions would be highly appreciated?
Thanks
Thomas
I've had a c2665dnf for almost 2 years and practically no problems. Recently, the scanner bed has a yellow line when using the scanning tray. The regular scan works great, so I think it must be the scanner on top. I've wiped down the screen multiple times, but haven't cracked open the printer yet. Any suggestions would be greatly appreciated.
How may I send AT Commands to the Fax Modem in a 3115cn MFP printer please?
I need to send it "ATS11=70&W" to overcome a very slow, lengthy, touchtone dialing tone spacing. Fax calls are timing out. Can I telnet or SSH into it & reach the Fax modem command line interface?
Thanks,
Sam